Purpose of the machine for installing the AOG spray head During the aerosol production process , a spray head must be installed on the aerosol can. This task is fully performed by the built-in AOG sprayer, which is automatic and maintenance-free: sorting of the spray heads located in the basket loading hopper of the electromagnetic vibrator, feeding the spray heads into the machine using a caliper, application of spray heads to filled aerosol cans
The vibrator basket has a small capacity and requires continuous replenishment. Thus, the continuous supply system of the conductor can be additionally equipped with a lift with a spray head R-1320, which, having high productivity, can be supplemented cyclically at long intervals and does not require constant maintenance. Both devices can be interconnected using an electronic system that provides continuous replenishment of the aircraftT echnical data:
Spray Head Installation Machine Overall dimensions Dimensions: (H x W x D) 1800 x 600 x 1040 mm Weight: ~ 95 kg The performance in the standard configuration is expected to be 1000 - 3300 pcs/ hour (1655 pcs/min). The maximum capacity of the device is 3300 pcs/hour (55 pcs/min) and depends on the size of the containers used in the production process. The outer diameter of the containers: Standard 35 66 mm (depending on the installation equipment you have). Height of workpieces containers: Standard from 105 mm to 320 mm, ( lower containers up to 65 mm can be used) The type of spray head is Standard-wg.designs type of valves for capping containers: diameter 1” (female, male) Power supply compressed air: constant pressure 0.8 1.2 Mpa (8 12 bar; 120 174 PSI) Power supply wires: G 1/2” Compressed air quality: according to the ISO 8573-1 standard for temp. 15 ÷ 350 C => CLASS IV: maximum particle size 15 m maximum density
